? semiconductor components industries, llc, 2003 august, 2003 ? rev. 0 1 publication order number: nup4201mr6/d nup4201mr6 low capacitance tsop-6 diode-tvs array for high speed data lines protection the nup4201mr6 transient voltage suppressor is designed to protect high speed data lines from esd, eft, and lighting. features: ? low capacitance (3 pf maximum between i/o lines) ? esd rating of class 3b (exceeding 8 kv) per human body model and class c (exceeding 400 v) per machine model ? protection for the following iec standards: iec 61000?4?2 (esd) 15 kv (air) 8 kv (contact) iec 61000?4?4 (eft) 40 a (5/50 ns) iec 61000?4?5 (lighting) 23 a (8/20 s) ? ul flammability rating of 94 v?0 typical applications: ? high speed communication line protection ? usb 1.1 and 2.0 power and data line protection ? digital video interface (dvi) ? monitors and flat panel displays maximum ratings (t j = 25 c unless otherwise noted) rating symbol value unit peak power dissipation 8 x 20 s @ t a = 25 c (note 1) p pk 500 w operating junction temperature range t j ?40 to +125 c storage temperature range t stg ?55 to +150 c lead solder temperature ? maximum (10 seconds) t l 235 c human body model (hbm) machine model (mm) iec 61000?4?2 air (esd) iec 61000?4?2 contact (esd) esd 16000 400 20000 20000 v 1. non?repetitive current pulse per figure 1 (pin 5 to pin 2) tsop?6 low capacitance diode tvs array 500 watts peak power 6 volts marking diagram device package shipping ordering information NUP4201MR6T1 tsop?6 3000/tape & reel tsop?6 case 318g plastic 1 6 pin configuration and schematic 6 i/o 5 v p 4 i/o i/o 1 v n 2 i/o 3 http://onsemi.com 63 = specific device code m = date code 63 m
nup4201mr6 http://onsemi.com 2 electrical characteristics (t j =25 c unless otherwise specified) parameter symbol conditions min typ max unit reverse working voltage v rwm (note 2) 5.0 v breakdown voltage v br i t =1 ma, (note 3) 6.0 v reverse leakage current i r v rwm = 5 v 5.0 a clamping voltage v c i pp = 5 a (note 4) 12.5 v clamping voltage v c i pp = 8 a (note 4) 20 v maximum peak pulse current i pp 8x20 s waveform 25 a junction capacitance c j v r = 0 v, f=1 mhz between i/o pins and gnd 3.0 5.0 pf junction capacitance c j v r = 0 v, f=1 mhz between i/o pins 1.5 3.0 pf 2. tvs devices are normally selected according to the working peak reverse voltage (v rwm ), which should be equal or greater than the dc or continuous peak operating voltage level. 3. v br is measured at pulse test current i t . 4. non?repetitive current pulse per figure 1 (pin 5 to pin 2) typical performance curves (t j = 25 c unless otherwise noted) figure 1. pulse derating curve 100 90 80 70 60 50 40 30 20 10 0 0 25 50 75 100 125 150 175 200 t a , ambient temperature ( c) figure 2. 8 20 s pulse waveform 100 90 80 70 60 50 40 30 20 10 0 0204060 t, time ( s) % of peak pulse current t p t r pulse width (t p ) is defined as that point where the peak current decay = 8 s peak value i rsm @ 8 s half value i rsm /2 @ 20 s 80 figure 3. junction capacitance vs reverse voltage 5.0 2.5 0.0 01 v br , reverse voltage (v) junction capacitance (pf) 2345 i/o lines i/o?ground peak power dissipation (%) 4.5 2.0 4.0 1.5 3.5 1.0 3.0 0.5 figure 4. clamping voltage vs. peak pulse current (8 x 20 s waveform) 20 10 0 010 peak pulse current (a) clamping voltage (v) 20 30 40 50 18 8 16 6 14 4 12 2
nup4201mr6 http://onsemi.com 3 package dimensions tsop?6 case 318g?02 issue j 23 4 5 6 a l 1 s g d b h c 0.05 (0.002) dim min max min max inches millimeters a 0.1142 0.1220 2.90 3.10 b 0.0512 0.0669 1.30 1.70 c 0.0354 0.0433 0.90 1.10 d 0.0098 0.0197 0.25 0.50 g 0.0335 0.0413 0.85 1.05 h 0.0005 0.0040 0.013 0.100 j 0.0040 0.0102 0.10 0.26 k 0.0079 0.0236 0.20 0.60 l 0.0493 0.0610 1.25 1.55 m 0 10 0 10 s 0.0985 0.1181 2.50 3.00 ____ notes: 1. dimensioning and tolerancing per ansi y14.5m, 1982. 2. controlling dimension: millimeter. 3. maximum lead thickness includes lead finish thickness. minimum lead thickness is the minimum thickness of base material. 4. dimensions a and b do not include mold flash, protrusions, or gate burrs. m j k
nup4201mr6 http://onsemi.com 4 on semiconductor and are registered trademarks of semiconductor components industries, llc (scillc). scillc reserves the right to mak e changes without further notice to any products herein. scillc makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does scillc assume any liability arising out of the application or use of any product or circuit, and s pecifically disclaims any and all liability, including without limitation special, consequential or incidental damages. atypicalo parameters which may be provided in scillc data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. all operating parameters, including atypicalso must be validated for each customer application by customer's technical experts. scillc does not convey any license under its patent rights nor the rights of others. scillc products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body , or other applications intended to support or sustain life, or for any other application in which the failure of the scillc product could create a sit uation where personal injury or death may occur. should buyer purchase or use scillc products for any such unintended or unauthorized application, buyer shall indem nify and hold scillc and its of ficers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and re asonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized u se, even if such claim alleges that scillc was negligent regarding the design or manufacture of the part. scillc is an equal opportunity/affirmative action employ er. publication ordering information japan : on semiconductor, japan customer focus center 2?9?1 kamimeguro, meguro?ku, tokyo, japan 153?0051 phone : 81?3?5773?3850 on semiconductor website : http://onsemi.com for additional information, please contact your local sales representative. nup4201mr6/d literature fulfillment : literature distribution center for on semiconductor p.o. box 5163, denver, colorado 80217 usa phone : 303?675?2175 or 800?344?3860 toll free usa/canada fax : 303?675?2176 or 800?344?3867 toll free usa/canada email : orderlit@onsemi.com n. american technical support : 800?282?9855 toll free usa/canada
|
